In the sixth class of the acoustics for podcasting course we will see how to build our studio according to the room-within-room model and how to make our own acoustic solutions. The time has come for our walls, floors and ceilings to do their job and isolate our studies from external and internal noise. Let’s see layer by layer how they should be built and what directions we must follow so that no dB escapes. Dominican Republic Email List Let’s put on our gloves, DIY glasses and Let’s get to work! This content is only available to subscribers.
You can identify yourself in this link or subscribe to the courses . As you can see, each surface is made up of several layers and each of these layers has the mission of cushioning the impact, absorbing sound, mechanically decoupling it. In short, get it to lose energy whatever its origin. To finish understanding the particularities of each surface, I encourage you to do the following practice: Calculate the number of slats, Uae Phone Number floor plates, meters of acoustic fabric and join points that you would need to soundproof your floor.
Calculate the approximate material you would need and take it to the online shopping cart of your preferred DIY store to budget it. If you don’t finally need to do this type of work because soundproofing is not a problem, I encourage you to at least build your acoustic panels and place the acoustic solutions that we have seen in previous classes to see the difference. So far the class! As always, if you have any questions, you can send them through the intranet support form. See you in the next lesson! 🙂